§ 1203.32. Definitions.
219 words·~1 min read·
/us/cfr/t16/s§ 1203.32·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
The following definitions shall apply to this subpart:
(a)Foreign manufacturer means an entity that manufactured a bicycle helmet outside the United States, as defined in 15 2052(a)(10) and (14).
(b)Manufacturer means the entity that either manufactured a helmet in the United States or imported a helmet manufactured outside the United States.
(c)Private labeler means an owner of a brand or trademark that is used on a bicycle helmet subject to the standard and that is not the brand or trademark of the manufacturer of the bicycle helmet, provided the owner of the brand or trademark caused, authorized, or approved its use.
(d)Production lot means a quantity of bicycle helmets from which certain bicycle helmets are selected for testing prior to certifying the lot. All bicycle helmets in a lot must be essentially identical in those design, construction, and material features that relate to the ability of a bicycle helmet to comply with the standard.
(e)Reasonable testing program means any tests which are identical or equivalent to, or more stringent than, the tests defined in the standard and which are performed on one or more bicycle helmets selected from the production lot to determine whether there is reasonable assurance that all of the bicycle helmets in that lot comply with the requirements of the standard.